Waypoint Navigation - Simrad CE33 ChartSounder Manual

CE33 Pilot menu & navigation examples
A course line will now be drawn from actual position (ship's posi-
tion) to destination point (cursor's position).
Next destination: While on the way, you can easily move the cursor
to the next destination, and when ready to change navigation leg...
GOTO
Press [GOTO] and [2] to...
"Restart to approaching point"
2
- a new course line will be drawn from ship's position to destination.
To turn NAV mode off again:
GOTO
Press [GOTO] and [3] to...
"Turn NAV off" from active chart display
3
or...
MENU
Press [MENU] and [4], [2] to...
"Turn NAV off" via the menu
4,2

6.5.2 Waypoint navigation

There are two ways of activating Waypoint navigation:
From the chart display using [GOTO] or from the menu system.
From the chart:
Shortcut to chart display
CHART
Place cursor on destination waypoint
Select NAV mode, and...
GOTO
Select Waypoint
2
This will activate the pop-up window "Navigate to WP" - now
follow the procedures from the
[ENT] to start navigation.
a few lines further ahead, or press
Chapter 6-11