Cursor Placed On Routepoint Or Linepoint - Simrad CE33 ChartSounder Manual

CE33 Chart menu and INFO windows

3.3.5 Cursor placed on routepoint or linepoint

With chart in active page, and cursor placed on a routepoint or line-
ENT
point, press [ENT] to call up an info window with the following to
choose from:
Routepoint found
Name: RTE 1
From start:
To end:
1
2
3
4
9
0
PAGE
MENU
1
Edit user data opens for a new info window:
Routepoint
1
2
CLR
3
4
5
MENU
More user data will toggle between data on routepoint and route leg
PAGE
108.8nm
34.26nm
Edit user data
Chart info
Find nearest port services
Bearing and dist from A to B Refer to section 3.3.2
Chart setup
Cursor to center
More user data
Exit
Open new info window to edit routepoint
Edit point
Move point with cursor
Move point
Delete point Delete routepoint
Add point to route - in beginning or at end.
Add point
Open new info window to edit route
Edit
Delete the whole route
Delete
Exit info window
Exit
5
Refer to Appendix C
Refer to Appendix C
Refer to section 3.4
Refer to section 3.3.2
Exit info window
Chapter 3-11