Echosounder Menu; Echosounder Display - Simrad CE33 ChartSounder Manual

Chapter 7-2

7.1 Echosounder menu

1
Echo 50kHz
2
Echo 200kHz
3
Turn bottom expansion ON
4
Turn VRM expansion ON
5
Turn A-scope ON
6
Depth & temperature diagram - see section 7.7
7
Echosounder setup

7.2 Echosounder display

Low and high frequency echosounder display can be set up sepa-
rately. The low frequency display will show deep water bottom
contours, and the high frequency display will show the mid-water
section with trawl targets or bait fish in a higher resolution.
As an example:
MENU
Call up the menu bar, and...
load the Echo display for 200kHz
5,2
- see display example on next page.
Hotkey to Echo display i.e. jumps to page with Echo 50kHz or Echo
ECHO
200kHz display; if none: inserts the last active Echo display in active
page.
From active Echo display: hold [ECHO] key depressed for two sec-
ECHO
onds to toggle between Echo 50kHz and Echo 200kHz displays.
ECHO
5
ECHO
CE33 Echosounder operation
- see section 7.2
- see section 7.2
- see section 7.3
- see section 7.4
- see section 7.5
- see section 7.8
2 secs.