Navigation/Hdt Display - Simrad HS52 Instruction Manual

Bargraph
showing
Accuracy
level on
position
Bargraph
showing
quality
HDT
20222360 / E
COG
quality
HDT-Q
POS-Q
SAFE
270
12m
LNK
DIF
COG
P
SOG
A reduced HDT_Q status indication will be shown after 60
seconds of GPS heading loss. An invalid HDT-Q status
indication will be shown after 300 seconds of GPS heading loss
in the system, and the output of heading data will terminate. In
the first 300 seconds after loss of GPS heading, the heading
output is determined from the inertial element.
The data quality status information indicated on the Display unit
is also included in some of the NMEA messages that can be
output on the serial lines.

Navigation/HDT Display

When pressing the
between two different displays for heading information.
Primary NAV1/HDT display, shown after the start-up screen
when the HS52 is turned ON.
True heading is shown as a big number in the centre of the
compass with the COG value above it.
OPERATING INSTRUCTIONS
000
324
337
ROT 0.6 º/min
button, the HS52 will toggle
NAV1/HDT
True
heading
090
S
45