Loran C - Simrad CE33 ChartSounder Manual

Chapter 9-10

9.5 Loran C

MENU
Call up the menu bar, and...
load Loran C chain display
7,5
Leaf through the available chains - see listing further ahead in this
+/-
section.
If required, go to the slaves, and...
Toggle between available slaves (not all chains have more than one
+/-
slave)
...and it is possible to alter the figures in the time delay
0-9
If required, go to Offset, and key in a positive or negative offset
Key in a positive or negative offset to the time delay (toggle positive/
0-9
negative with +/-)
Confirm entry
ENT
To change the position readouts to Loran C mode, see section 4.1
under Position setup, where 'Display position as' can be toggled to
'Loran C'.
CE33 Setup menu