Anchor Guard; Mob Alarm And Navigation - Simrad CE33 ChartSounder Manual

CE33 Pilot menu & navigation examples

6.3 Anchor guard

MENU
Call up the menu bar, and...
activate the anchor guard function
4,5
-the chart display will provide an impression of the vessel's position
in relation to the alarm circle.
To check/change the preset alarm distance:
MENU
Call up the menu bar, and...
load the highway display
4,1
enter the navigation setup display
ENT
Move cursor to the Anchor alarm distance
Enter new value with numeric keys
0-9
Confirm the change
ENT
To turn Anchor guard off again:
MENU
Call up the menu bar, and...
turn anchor guard off
4,2

6.4 MOB alarm and navigation

The MOB - Man overboard - alarm and display will be activated if
you press the [MOB] key on the CE33 keypad and hold it depressed
for two seconds, or activate an external MOB switch (hold two sec-
onds). The MOB display will provide all relevant data for an effi-
cient rescue operation - refer to details on the rear of the front page.
To turn the MOB function off again:
MENU
Call up the menu bar, and...
turn the MOB function off
4,2
To check the last activated MOB position:
MENU
Call up the menu bar, and...
select MOB position
6,2
Chapter 6-9