Simrad CE33 ChartSounder Manual page 111

CE33 Miscellaneous menu
Save on DataCard
3
Press [3] to call up a new INFO window where you can see which
data will be transferred i.e. routes, waypoints, etc. and how much
space it will take up in bytes + percentage of max. storage capacity.
Choose which databank you wish to transfer the data to (use the +/-
keys). The actual date and time will be saved with the data transfer.
A name can be added for easy identification later on.
Press [ENT] to activate 'Save on DataCard'
ENT
You will now receive a warning that existing data on the DataCard,
in the selected databank, will be overwritten. You can not 'add more
information' to data already transferred. Whenever transferring data
from a CE33 to Databank 1 or 2 on the DataCard, or from Databank
1 or 2 on DataCard to a CE33, the data package will replace the
entire capacity in the receiving unit.
Load from DataCard
Press [9] to call up a new INFO window where you can see which
9
data is stored in Databank 1 or 2 on the DataCard.
Use the +/- keys to toggle between DATABANK 1 and 2
+/-
Load:
Data generated by:
Saved:
Name:
Data type
Marks/WP:
Lines:
Routes:
Targets:
Tracks:
Setup:
Destination memory:
MENU
Press [ENT], [ENT] to transfer a copy of the data in DATABANK
ENT
1 to the internal memory in the CE33 unit. Any existing data in the
internal memory will be overwritten.
Amount
Exit
DATABANK-1
Simrad CE33
15-02-2002 19:43:00
Size
11 256
1 80
1 96
3 72
0 0
1 1745
504 bytes =
Load
Chapter 8-5
Select
ON
ON
ON
ON
ON
OFF
0%
ENT