Pilot Menu - With Nav Active - Simrad CE33 ChartSounder Manual

CE33 Pilot menu & navigation examples
Navigation mode - RHUMBLINE navigation is used for shorter
distances, and GREAT CIRCLE for long trips, especially when
crossing at high latitudes. COMPOSITE navigation is used when all
the legs in a route are not set to the same navigation mode.
Auto waypoint shift - can be set to WP-circle, WP-line or OFF.
When set to WP-circle, the system will change to the next waypoint
in the route after passing the circle line (border).
When set to WP-line, the system will change to next waypoint in the
route after passing the waypoint line (border).
When "Auto waypoint shift" is set to WP-circle, then the alarm
function at the waypoint's circle will not be activated.

6.2 Pilot menu - with NAV active

1
Highway
2
Turn NAV off
3
WP advance
4
Restart to approaching point - see section 6.2.5
5
ETA & AVN
6
Trim & highway
7
Set & drift
This PILOT menu will appear when navigation mode is active.
If the selected navigation mode is Waypoint navigation, then point 3:
WP advance will not be available and therefore the color of the text
will differ from the rest of the menu text.
See also section 6.1 Pilot menu - with NAVin active, section 6.3
Anchor guard, section 6.4 MOB navigation and 6.5 Navigation
examples.
4
PILOT
- see section 6.2.1
- see section 6.2.3
- see section 6.2.4
- see section 6.2.6
- see section 6.2.7
- see section 6.2.8
Chapter 6-3