Echosounder Setup - Simrad CE33 ChartSounder Manual

CE33 Echosounder operation

7.8 Echosounder setup

The Echosounder setup display mainly consist of general settings,
but also applies to a specific frequency where stated. The CE33 fea-
tures semi dual transceiver transmitting at 50 and 200 kHz.
MENU
Call up the menu bar, and...
activate Echosounder setup display
5,7
Use the cursor key to move cursor around in the display
Select new values by means of the +/- keys
+/-
Confirm changes, or...
ENT
Abandon changes and exit display
MENU
Transducer - select transmitter frequency 50kHz or 200kHz. Insert
the depth (position) of the transducer below surface.
Display can show: DEPTH BELOW KEEL / SURFACE / TRANS-
DUCER.
Data on NMEA-out from - select the frequency you wish to use for
Chapter 7-9