Lightspeed TOPCAT Registration Manual page 7

TOPCAT ACCESS REGISTRATION GUIDE
REGISTRATION USING THE ACTIVATE APP
ADDING OR REPLACING A FLEXMIKE
For users adding a Flexmike, or replacing a lost or malfunctioning Flexmike.
1. Start with the Topcat plugged in and powered on. To verify it is powered
on, there will be a blue power light on the front of the Topcat.
2. If replacing a Flexmike, make sure the malfunctioning Flexmike is
powered off before you begin the process.
3. Power on the new Flexmike. Both microphone 1 and 2 blue lights
should be blinking.
4. Open the Flexmike battery compartment and pull the battery out
(leaving it plugged in) to reveal the registration button.
• If replacing a microphone, match the number 1 or 2 of the bad
microphone
• If adding a microphone, the new microphone would be number 2.
5. On your mobile device, open the Lightspeed Activate app.
6. Go to the 'Settings' tab and scroll down to find the 'Register' button and press the
button.
7. Tap the Mic 1 or Mic 2 button to add/replace the Flexmike.
8. Follow the instructions within the app to register the new Flexmike.
9. When the Flexmike is registered, you will see the Mic 1 or Mic 2 icon appear on the
screen.
10. The registration is complete. You can begin speaking into the Flexmike to verify there is audio.
11. Place system ID number (attached to the Topcat Quickstart Guide) on the new Flexmike.
NOTE: if at any point, the Topcat or Flexmike lights begin blinking rapidly, that indicates a registration
error. Turn off the Flexmike, then repeat steps 3-8.
Blinking lights
Power On
(NEW Flexmike)
Solid light
Registration ID Labels
Apply to system components to indicate which parts are registered
as a system. Keep registered items together when storing away.
334-0162-02-00-01 10101
00-01 00-01 00-01 00-01
00-01
00-01 00-01 00-01
00-01
00-01 00-01 00-01 00-01
00-01
00-01 00-01 00-01 00-01
00-01
00-01 00-01 00-01
00-01
00-01
00-01 00-01 00-01
00-01
RETAIN EXTRA LABELS IN THE EVENT A COMPONENT IS REPLACED OR ADDED.