Load Bios Defaults; Figure 9-7: Load Bios Defaults Screen - Advantech RUGGED PENTIUM IPPC-9120 User Manual

Reset Configuration Data
When enabled, this feature allows the system to clear the last BIOS
configuration data and then reset the data with the default BIOS
configuration data.
The options are: Disabled (Default), Enabled.
Used MEM base addr
Choose and use the MEM base address.
The options are: N/A (Default), C800 ~ DC00.
Assign IRQ for USB
Assigns an IRQ for the USB.
The options are: Disabled (Default), Enabled.

9.8 Load BIOS Defaults

Figure 9-7: Load BIOS defaults screen

The BIOS defaults screen contains the most appropriate values of the
system parameters that allow minimum system performance.
Chapter 9 Award BIOS Setup 119