Servicing - Removal And Replacement; Battery - Mackworth SA180E Service Manual

9.0 – Servicing – Removal and Replacement
This section will cover the details of how to remove, refit and replace all serviceable parts to the
Stand Aid. The step by step process is to be followed in sequence to perform a successful service on
the Stand Aid. Unless stated otherwise, all images refer to a Mackworth Essentials SA180E.
NOTE: Before carrying out any work on a Mackworth Essentials SA180E Stand Aid, remember to
remove the charger lead and remove any external power source.
Prior to any servicing the Emergency Stop Button on the Control Box must be activated to remove

9.1 - Battery

This section will instruct the correct procedure on how to remove and replace the Battery.
Removal
Step 1 – Grab the Battery in the same fashion as shown in the image below.
Step 2 – Press the leaver on the battery at the top end of the battery and lift away from its
location.
995064 – Revision A
any power to the product.
Page 14 of 36