Foot Tray - Mackworth SA180E Service Manual

9.12 – Foot Tray
Within this section it will explain the correct procedure on removing and reinstalling the Foot Tray
for servicing procedures or replacement.
Removal
Step 1 – Foot Tray is attached to the Base by the Pins circled in the image below. (Where
applicable, use circlip pliers to remove the retaining circlips)
Step 2 – Lift the Foot Tray of the Pins to remove.
Refitting / Replacement
Step 3 - Refitting is a reversal of the removal process.
995064 – Revision A Page 30 of 36