Introduction; Safety Precautions - Mackworth SA180E Service Manual

1.0 – Introduction
This Manual will explain how to carry out interim servicing and parts replacement on the Mackworth
Essentials SA180E Stand Aid safely and effectively. This document is divided into sections to help a
Service Engineer find the correct information. Each section will show in a step by step fashion the
correct way to disassemble and assemble the Stand Aid. The aim of the Manual is to help and assist
you, so that you can provide a successful service for the end user.
2.0 – Safety Precautions
Read and understand this manual in its entirety before servicing the Mackworth Essentials SA180E
Stand Aid.

Mackworth authorised personnel must complete the Full and Interim services of the
Mackworth Essentials SA180E Stand Aid.

The Stand Aid must not be in use by the user during any form of servicing.

Ensure that the all servicing procedures are followed correctly as instructed in this manual.

All listed tools and equipment stated in this Manual must be used to safely service this hoist.

Ensure you have assessed all risks for your environment and any persons within that
environment before commencing work.

Ensure you have all PPE available to carry out the work before commencing.
995064 – Revision A Page 3 of 36