Upper Assembly - Mackworth SA180E Service Manual

9.6 – Upper Assembly
Within this section it will explain the correct procedure on removing and reinstalling the
Upper Assembly for servicing procedures or replacement.
Removal
Step 1 – Remove the Lift Actuator Cable. (See section 9.2.2)
Step 2 – Remove the Lift Actuator. (See section 9.5)
Step 3 – Using two 6mm Allen Keys, remove one of the Bolts securing the Upper Assembly to
the Frame.
Step 4 – Using a Knife or similar tool, remove the Cap from the Upper Assembly to access the
threaded boss.
Step 5 – Insert a 4mm Allen Key or similar tool into the threaded boss hole, and use a 6mm
Allen Key to remove the second Bolt.
995064 – Revision A Page 22 of 36