Nortel DMS-100 User Manual page 92

92 Chapter 3: EIU datafill
Table 22 Field descriptions for table IPTHRON for EIU datafill (continued)
Field Subfield or
refinement
OPTION
SNNODE
SMNINDEX
APUINDEX
(Sheet 2 of 3)
297-8991-910 Standard 03.01 August 1999
Entry Explanation and action
see subfield Option
This field consists of subfield SNNODE.
AP, SuperNode node
APU, Enter the name of the SuperNode node.
CM, The node must first be datafilled in its
EIU, inventory table. For example, FP must
ELIU, be datafilled in table APINV. Up to eight
FP, nodes can be entered. If less than eight
or are required, end the list with a $ (dollar
MS sign).
Enter AP (application processor) and
datafill refinement SMNINDEX.
Enter APU and datafill refinement
APUINDEX.
Enter CM and go to refinement
TXCAPCT.
Enter EIU and datafill refinement
EIUINDEX.
Enter ELIU and datafill refinement
ELIUINDEX.
Enter FP (file processor) and datafill
refinement SMNINDEX.
Enter MS (message switch) and datafill
refinement MSINDEX.
0 to 99 Synchronized and matched node index
If the entry in field SNNODE is AP or
FP, enter the synchronized and
matched node (SMN) index.
Go to refinement TXCAPCT.
Application processor unit index
0 to 750
If the entry in field SNNODE is APU,
enter the APU index.
Go to refinement TXCAPCT.