Table 28 Eiu Installation Checklist - Nortel DMS-100 User Manual

112 Appendix A: EIU installation checklist
Use the list in table 28 as a checklist to ensure that you meet all installation
requirements for hardware, software, and datafill.

Table 28 EIU installation checklist

Item description
Hardware
EIU hardware (NTEX22, NT9X84, NT9X85) circuit packs (one
each per EIU)
EIU attachment unit interface (AUI) cable, NTNX36PY
Media access unit (MAU)
Software
Former DMS-core software packages:
• NTXF05AA - EIU
• NTXF19AA - transmission control protocol/Internet
Protocol (TCP/IP) software
• NTXS11AA - file transport protocol (FTP) software
• NTX70AA - TELNET/ RMAP software
Effective CSP02, these software packages are integrated with
the telecom layer software.
EIU software load:
• - ETC - Ethernet IP router customer load
Consult the DMS-100 PM Software Release Document , 297-
8981-599
Datafill
EIU media access control (MAC) address
Note: Refer to Appendix I Obtaining a MAC address
SuperNode and EIU IP addresses
Tables LIUINV, IPTHRON, IPNETWRK, IPROUTER, IPHOST,
ENSITES, ENTYPES, and EXNDINV
297-8991-910 Standard 03.01 August 1999
Contact
Nortel
Nortel
HP recommended MAU
with LEDs and SQE
switch and sufficient
shielding
Nortel
Nortel
Nortel
Nortel
customer and Network
Information Center
(NIC)
Nortel
customer
Check