Nortel DMS-100 User Manual page 70

Nortel ethernet interface unit user guide
Hide thumbs Also See for DMS-100:
Table of Contents

Advertisement

70 Chapter 3: EIU datafill
Table 11 Field descriptions for table LIUINV for EIU datafill (continued)
Field
Subfield or
refinement
LIUNO
LOCATION
LOCATION
CTRL
CONTROL
MSCARD
MSPORT
LIMNUM
SHELFNUM
(Sheet 2 of 4)
297-8991-910 Standard 03.01 August 1999
Entry
Explanation and action
0 to 511
Link interface unit number
Enter the number assigned to the EIU.
The actual physical location of the EIU.
This field identifies the shelf and slot
number where the EIU is located
Location
see subfields
Enter the location of the EIU on the host
link interface module.
This field consists of subfields CTRL,
SHELFNUM, and LIUSLOT.
see subfield
Control information
This field consists of subfield
CONTROL.
Controlling host entity
LIM or MS
Enter MS if the host is a message
switch and datafill subfields MSCARD
and MSPORT.
Enter LIM if the controlling host is a link
interface module and datafill field
LIMNUM.
5 to 23
Message switch card
If the entry in field CONTROL is MS,
enter the message switch card number.
Any entries outside the range indicated
for this field are invalid.
0 to 3
Message switch port
If the entry in field CONTROL is MS,
enter the message switch port number.
0 to 16
Link interface module number
If the entry in field CONTROL is LIM,
enter the host LIM number on which the
LIU resides.
Otherwise, leave this field blank.
0 to 3
Shelf number
Enter the shelf number, at the host LIM,
on which the EIU is located.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents