Tutorial: Moving Files - Nortel DMS-100 User Manual

126 Appendix C: Using FTP
2
Tutorial: moving files
This section provides a set of procedures to move files between a remote host
and the DMS-100 switch which is the local host. It describes the command
lines for the following FTP operations:
•
•
•
•
•
Procedure 5 Copying ASCII files to and from the remote host
Step
1
2
3
4
297-8991-910 Standard 03.01 August 1999
You have completed this procedure.
setting file type to ASCII
moving an ASCII file from the remote host to local host
moving an ASCII file from the local host to remote host
setting file type to binary
moving a binary file from remote host to local host
Action
Establish an FTP session and determine your location as described in
procedure 1 in this appendix.
Determine the next step.
If the file
is not on the current
remote directory
is on the current
remote directory
Change directory on the remote host by typing
ftp> cd path_name
and pressing the Enter key.
where
path_name is a valid directory path
Example:
ftp> cd '/team/bin'
Example of a MAP response:
250 CWD command successful.
Set the file type to ASCII by typing
ftp> ascii
and pressing the Enter key.
Example of a MAP response:
200 Type set to A.
Do
step 3
step 4