Commands And Fixed Parameters; Variables; Responses - Nortel DMS-100 User Manual

Commands and fixed parameters
Commands and fixed parameters that are entered at a MAP terminal are shown
in uppercase letters:
>BSY CTRL

Variables

Variables are shown in lowercase letters:
>BSY CTRL
The letters or numbers that the variable represents must be entered. Each
variable is explained in a list that follows the command string.

Responses

Responses correspond to the MAP display and are shown in a different
typeface:
FP 3 Busy CTRL 0: Command request has been submitted.
FP 3 Busy CTRL 0: Command passed.
The following excerpt from a procedure shows the command syntax used in
this document:
Step Action
1 Start the FTP tool by typing
>ftp nnn.nnn.nnn.nnn
and pressing the Enter key.
where
nnn
Example:
>ftp 47.187.112.215
Example of a MAP response:
Allocated a Session ID Successfully 220 bcaryfc6 FTP
server
(Version $Revision: 1.21 $
ctrl_no
ctrl_no
is the portion of the IP address that identifies the node
DMS-100 Family EIU User Guide TELECOM12
$Date: 88/12/21 10:19:25 $) r
xix