Nortel DMS-100 User Manual page 136

136 Appendix C: Using FTP
Table 34 shows FTP operations for sessions started on a workstation for
connection to a DMS-100 switch. In this scenario, the DMS-100 switch is the
remote host and the workstation is the local host.
Table 34 FTP operations reference: workstation to DMS
Action
FTP login
Display the working directory of the
DMS
Change directories on the remote host
(DMS)
Change the working directory on the
local host (workstation)
List the directory contents on the
remote host (DMS)
Turn off automatic record length
detection
Turn on automatic record length
detection
List available active disk volumes
(Sheet 1 of 3)
297-8991-910 Standard 03.01 August 1999
Command sequence
WS> ftp IP_address
where
IP_address is the address of the remote host.
Enter a valid FTP userID and password to complete login.
WS> pwd
WS> cd /path_name
where
path_name is a valid path from the current working
directory
i.e. cd /PATH_NAME
WS> lcd /directory
where
directory is a valid path from the current working directory
WS> ls
WS>site autolrecl off
WS>site autolrecl on
WS>ls /