Supernode Se Link Interface Shelf; Figure 45 Sslpp Architecture - Nortel DMS-100 User Manual

Figure 45 SSLPP architecture

SR128/256 to MS 0
F-bus
interface

SuperNode SE link interface shelf

The SNSE LIS is part of the SuperNode SE configuration. In this arrangement,
the SNSE LIS is collocated with a DMS-bus (MS), 16kbyte ENET, CM, and
SLM hardware in a single frame. By virtue of the proximity to the MS, there
is no need to provide a fiber or DS30 interface with the SNSE LIS. The F-bus
interface hardware (rate adapter) is integrated into the MS. The SNSE LIS
shelf supports a maximum of 14 ASUs and services. To provision beyond this
maximum, either a separate SSLPP or LPP must be added to the office.
Figure 46 on page 184 provides an overview of the SNSE LIS configuration
with its inter-shelf F-bus connection to the MS.
F-bus 0
F-bus 1
ASU 1
Appendix H: ASU background information 183
SR128/256 to MS 1
ASU 12
DMS-100 Family EIU User Guide TELECOM12
F-bus
interface