Chapter 2 Preparations
Installation
1.19.2
Follow steps below to install a power supply unit:
1.
Refer to steps 1 to 4 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Remove the blank cover.
Slot for standard
power supply unit
3.
Insert the power supply unit until it is locked with clicking sound.
4.
Connect power cords.
Use the power cord that comes with the server and the one comes with the additional power supply
unit.
Power supply unit
(standard)
98
REAR
Note
Keep the removed blank cover for future use.
Power cord for
power supply unit
1
Express5800/R120d-1M User's Guide
1. Installing Internal Optional Devices
Slot for additional
power supply unit
Power supply unit
(additional)
Power cord for
power supply unit
2