Table of Contents
Advertisement
Chapter 2 Preparations
6.
Fix the PCI card with the screw you removed at step 4.
7.
Connect the PCI riser card to the
motherboard slot and fix the card with
the screw you removed at step 2.
When connecting the card, position the
terminal part of the PCI riser card to the
slot on the motherboard and insert it.
8.
Continue to install or remove internal optional devices, mount and connect the server, and turn it on.
9.
Make sure that no error messages are displayed on POST screen.
For details on POST error messages, refer to Chapter 3 (1. POST Error Message) in "Maintenance
Guide".
10. Start the configuration utility installed on the mounted board to set up the board.
Availability or startup and operation procedure of the utility depends on board. For details, refer to the
manual that comes with the board. If a PCI card including RAID Controller and LAN adapter
which connects to any bootable device is added, the boot priority might be changed to the
default setting. In that case, configure the boot priority in Boot menu of BIOS Setup Utility. For
details, refer to Chapter 2 (1. Detail of System BIOS) in "Maintenance Guide".
Removal
1.13.4
To remove a PCI card, reverse the installation procedure.
Run SETUP and change boot order in Boot menu. Refer to Chapter 2 (1. Details of System BIOS) in
"Maintenance Guide" for how to specify it.
If using the server while the card is removed, attach the blank cover that comes with the riser card.
82
PCIe #1C Low Profile side
PCIe#2 ロープロファイル側
Tips
To connect a PCI card to the connector on motherboard with cable, connect a
cable to PCI card before installing PCI riser card.
Express5800/R120d-1M User's Guide
1. Installing Internal Optional Devices
PCIe #1B Full Height side
PCIe#1 ロープロファイル側
Advertisement
Table of Contents
