Rdm; Supported Rdm Functions; Rdm Functions; Sensors - SGM Q Series User Manual

*Continued from previous page
Level 1 Level 2
Manual Editor
Test LED panel test
Display test

RDM

Supported RDM functions

The Q-8 features support for various RDM functions.
RDM (Remote Device Management) is a protocol enhancement to USITT DMX512 that allows bi-directional communication
between the fixtures and the controller over a standard DMX line. This protocol will allow configuration, status monitoring, and
management.
You will need an RDM controller to get control over the supported parameters. See the tables below for supported RDM functions.

RDM Functions

PID Actions
allowed
0x0082 -
0x0081 -
0x00E0 -
0x00E1 -
0x0200 -
0x0201 -
0x0080 -
0x0400 -
0x0051 -
0x0501 -
0x0500 -
0x0090 -
Please note: The RDM controller communicates with the fixtures to show only the available sensors for this fixture. The table is
subject to change without notice.

Sensors

RDM enables various sensor readouts for remote device monitoring. See the table below for sensors and sensor types.
Name
Mainboard
RGB Left
RGB Right
Strobe Left Bottom
Strobe Right Bottom
Strobe Left Top
Strobe Right Top
Humidity Base
Humidity Head
Please note: The RDM controller communicates with the fixtures to show only the available options for each RDM function. The
table is subject to change without notice.
14
Level 3 Function
Program Currently selected program (1, 2 or 3).
Scene Currently selected scene (1-24).
Red Red value in currently selected scene (0-255).
Green Green value in currently selected scene (0-255).
Blue Blue value in currently selected scene (0-255).
Strobe Strobe blinders intensity (0-255)
Strobe Function Strobe blinders behaviour (0-20)
Fade Time (Min.) Fade-in (transition) time to current scene in min. (0-511).
Fade Time (Sec.) Fade-in (transition) time to current scene in sec. (0-59).
Wait Time (Min.) Wait (static) time in current scene in min. (0-998).
Wait Time (Sec.) Wait (static) time in current scene in sec. (0-59).
Test the LED panels of the fixture
Test the fixture display
Name
Device Label
Manufacturer Label
DMX Personality
DMX Personality description
Sensor Definition
Sensor Value
Device Model Description
Device Hours
Parameter Description
Display Level
Display Invert
Factory Defaults
Sensor Type
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Other
Other
PID Actions
allowed
0x1001 -
0x0120 -
0x0121 -
0x0122 -
0x8626 SET
0x8060 GET
0x8632 GET/SET
0x8625 GET / SET
0x8634 GET/SET
0x8637 GET/SET
Name
Wireless Signal Strength
Wireless Paired
Voltage 50V
Voltage 16v
RGBW PWM
Fixture Derating
Base
Name
Reset Device
Slot info
Slot Description
Default Slot Value
CRMX Log Off
Serial Nr.
SMPS Calibration
FAN 0=AUTO 1=LOW
2=HIGH 3=FULL
0=HOLD 1=LOW
2=HIGH 3=Q COLOR
CRMX Bridge Mode
Sensor Type
Other
Other
Voltage
Voltage
Other
Other
Temperature