Safety And Precautions - 360 Vision Predator Radar Installation & Configuration Manual

Predator Radar Installation Manual_V8_1_28_00 Page 4 of 78

1 Safety and Precautions

1. Please read these notes before attempting to operate the 360 Vision Predator Radar, and keep for future
reference.
2. DO NOT disassemble or remove covers. This will break the water seals and invalidate the warranty.
3. All servicing and repairs must be handled by 360 Vision Technology.
4. Avoid pointing the camera directly towards a bright light source (sunlight), or expose the camera to intensive
light situations as this may damage the camera pick-up device.
5. Installation should be carried out by suitably qualified personnel, in accordance with local codes of practice
and regulations.
6. 360 Vision Technology Limited accept no liability for any damage caused by incorrect or improper installation.
7. To prevent risk of injury caused by the Predator Radar or mounting options becoming detached, fit a suitable
safety chain or lanyard.
8. Connection of data signals and power should only be made using a pre-made Predator Composite cables.
9. Use only 360 Vision Predator Radar power supplies. These have suitable terminals for all the wires in the
Predator composite cable.
10. Please handle the Predator Radar with care, as improper handling may cause damage within this unit.
© 360 Vision Technology Ltd