Network Settings - 360 Vision Predator Radar Installation & Configuration Manual

Predator Radar Installation Manual_V8_1_28_00
12 Netowork Connection - Setup
Further Configuration

Network Settings

Select the "Network" sub-heading to access the Radar's Network Settings page.
scan�!�
Status
Initial
Settings
Live
Target
System Logs
Maintenance
Help
Diagnostics
Various Radar related network settings can be changed here. These are:
A description of each of these is below. You must click 'Save' to save any changes to this
screen.
Enable DHCP
IP Address
NETWORK SETTINGS
Enable DHCP
Setup
IP Address
�Jetwork
Subnet Mask
Radar
Camera
Default Gateway
. A . I i gnment
Detection Zones
Hostname
Date & Time
VMS Events
DNS Server
Feed
Username
Logs
Password
MAC
Save .J
The Network Settings page
Enable DHCP
IP Address
Subnet Mask
Default Gateway
Hostname
DNS Server
Username
Password
Sets whether the Radar uses the static IP address entered in the IP
Address field or gets an IP Address from a network DHCP server. If
using a DHCP server then the Hostname (see below) should be used
to access the Radar web page rather than the IP Address listed.
The network IP address of the Radar if not using DHCP.
© 360 Vision Technology Ltd
0
1 92 168 1105 j
j255 255 255 0
t19216811
lsc�n3GO
1 92. 1 [ 68. 1 . 1
!admin
!admin
54-10-ec-42-e5-1 c
On/Off
xxx.xxx.xxx.xxx
yyy. yyy. yyy. yyy
zzz.zzz.zzz.zzz
name of the Radar on the network
aaa.aaa.aaa.aaa
username for login to Radar - max
20 characters
password for login to Radar - max
20 characters
Page 27 of 78
8
8
0
8
0
8
0
0
8