Figure 4.4 The Ppc Without The Rear Cover; Installing The 2.5" Hard Disk Drive; Ppc-175T User Manual; Figure 4.5 Fastening The Hdd Metal Frame To The Hdd - Advantech PPC-175T User Manual

4.3

Installing the 2.5" Hard Disk Drive

One enhanced Integrated Device Electronics (IDE) hard disk drive may be attached
to the panel PC's internal controller which uses a PCI local-bus interface. The follow-
ing instructions are for installing the HDD:
1. A metal plate holds the HDD to the upper right-hand side of the metal shielding
case. (See Fig. 4-5.) Fix the two screws on the metal plate of two side of HDD.
2. Connect IDE cable from main board.
3. Place the HDD on the metal plate, and tighten the four screws from the bottom
of the metal plate.

PPC-175T User Manual

Figure 4.4 The PPC without the Rear Cover

Figure 4.5 Fastening the HDD metal frame to the HDD

24