Datalogger; Preparation Before Execute Datalogger Function - Lutron Electronics FG-6020SD Operation Manual

4-4 LCD Back Light On/Off
During the measurement, press the " BACKLIGHT Button "
( 3-3, Fig. 1 ) once the LCD Back Light will be ON. During
the LCD Back Light ON, press the " BACKLIGHT Button "
once again, the LCD Back Light will be OFF again.
4-5 Alarm beeper
If the measuring value over the 20.00 Kg, the internal
buzzer will sound for warning.

5. DATALOGGER

5-1 Preparation before execute datalogger function

a. Insert the SD card
* It recommend use memory card
Prepare a " SD memory card " ( 1 GB to 16 GB, optional ),
insert the SD card into the " SD card socket " ( 3-20, Fig. 1 ).
* When plug in the SD card, the up side of the SD card
should face against the down case.
b. SD card Format
If SD card just the first time use into the meter, it
recommend to make the " SD card Format " at first. ,
please refer chapter 7-1, page 20.
* It recommend strongly, do not use memory cards that
have been formatted by other meter or by a computer.
Reformat the memory card with your meter.
c. Time setting
If the meter is used at first time, it should to adjust the
clock time exactly, please refer chapter 7-2, page 20.
4 GB.
≦
11