Dover markem-imaje 5200 Instruction Manual page 9

■ Installation checklist
1
Install power cord / plug
3
Assemble printhead
stand(s) or mounting pole(s)
4
Mount the printhead(s)
(See following page)
5
Connect umbilical
lines: ink, electrical,
and vacuum
6
Install any options
8
Set software
parameters
For detailed installation instructions, see the Model 5200/5400
Installation and Setup Guide.
■ Options / Accessories
For information on installing a Markem-Imaje option or accessory,
refer to the assembly instructions delivered with the item.
9
Safety - Installation
2
Instruction manual
Verify or change AC voltage
7
Turn on power