Dover markem-imaje 5200 Instruction Manual page 6

Safety - Installation
■ Automatic Startup
Do not allow an automatic packaging machine startup after a Model
5200/5400 reset. The Model 5200/5400 end user is responsible for
configuring the software and installing the status output signal option
in a way that requires the operator to manually restart the packaging
machine after a Model 5200/5400 condition has been cleared. Any
deviation from this method is unsafe and any consequences shall be
under the entire responsibility of the user.
■ Use
The printer is designed for drop-on-demand ink jet printing for
industrial package coding. Any other use of the printer is prohibited,
and any consequences shall be under the entire responsibility of the
user.
■ Handling
A printhead at operating temperature must not be moved. To prevent
printhead damage, the hot printhead must first be cooled down using
the Shutdown feature and then powered off before being moved.
Weight of print station (not including umbilical lines):
Model 5200: Approx. 63kg (140 lb)
Model 5400: Approx. 77kg (170 lb)
Printhead: Approx. 2.1kg (4.6 lb)
Regarding the system weight, handling tasks have to be performed
by more than one operator.
Instruction manual
6