Table of Contents
Advertisement
14
Ultra1500 Digital Drives Quick Start
Drive
Internal Shunt Power
Continuous Shunt Power
Instantaneous Shunt Power
Digital Input/Output Specifications
Type
External Power Supply
Requirements
Analog Input/Output Specifications
Inputs
Outputs
Motor Control Specifications
Feedback Device Power
Incremental Encoder
Requirements
Fuse and Contactor Recommendations
1
Main Power Fuses
Recommended Fuse Group 1
Recommended Fuse Group 2
Control Power Fuses
Recommended Fuse Group 1
Recommended Fuse Group 2
Recommended Fuse Group 3
5
Contactor
1 Fuses specified are Bussmann
2 FNQ-R fuses are described as Time-Delay Fuses, Class CC.
3 LPJ fuses are described as Dual-Element Time-Delay Fuses, Class J.
4 FRS-R fuses are described as Dual-Element Time-Delay Fuses, Class RK5.
5 For contactors: x represents coil voltage, and y represents number of contacts.
Publication 2092-QS001D-EN-P — July 2005
2092-DA1
–
–
Active Low, current sinking
Voltage: 21.6V to 26.4V
Maximum Current Draw: 64 mA
Note: Digital I/O is not powered by an internal supply, customer must connect an
external power supply.
Voltage range is -10V to +10V
Impedance of10 k Ω.
A/D conversion with 16-bit resolution
Voltage range -10V to +10V
Current output of up to 10 mA into a resistive load
D/A conversion with 12-bit resolution
5V supplied by drive for incremental and serial encoder devices.
Differential drivers for A, B, Z, and single-ended Hall signals S1, S2, and S3
Maximum line frequency: 4,000,000 lines/second (16,000,000 counts second)
2092-DA1
2
FNQ-R-7
3
NA
1
4
FRS-R-2-1/2
2
FNQ-R-7-1/2
3
LPJ-6
100-M05Nxy
®
fuses.
2092-DA2
2092-DA3
–
30W
–
3000W
2092-DA2
2092-DA3
FNQ -R-10
100-M09Nxy
100-M12Nxy
2092-DA4
2092-DA5
50W
70W
3000W
5000W
2092-DA4
2092-DA5
FNQ-R-15
FNQ-R-20
LPJ-15
LPJ-20
100-C16xy
100-C23xy
Advertisement
Table of Contents
