Components; Additional Accessories - Omni SONIC RUPTOR 400 User Manual

6
SECTION 2. UNPACKING THE SONIC RUPTOR 400

2.3 COMPONENTS

Prior to operation, please remove all parts from the shipping container and inspect for
damaged or missing parts. If any parts are found to be damaged or missing, please contact
Omni International at 1-800-776-4431.
Transducer Stand Assembly
Transducer Stand Clamp
2.4 ADDITIONAL ACCESSORIES (Sold Separately)
Solid Titanium Tips
All Solid Tips are of a single-piece design. Each includes a package of Five Interface Washers. Always
operate Tips in liquid (low surface tension or aqueous solution).
DESCRIPTION INTENSITY
5/32" Stepped
Micro
Processing Tip
3/8" Intermediate
Processing Tip
1/2" Medium-High
Processing Tip
3/4" Standard
Processing Tip
1.0" Full Size
Processing Tip
OR-T-156
Description
Control Unit
BNC Transducer
Power Cable
2" Pin Wrench
Instruction Manual
Sold Separately:
TIP SIZE
Diameter:
Very High
5/32" (3.8mm)
Intensity
Length: 10.1" (25.6cm)
High Diameter: 3/8" (9.5mm)
Intensity Length: 8.6" (21.8cm)
Diameter:
1/2" (12.7mm)
Intensity
Length: 5.38" (13.65cm)
Medium Diameter: 3/4" (19mm)
Intensity Length: 4.1" (10.5cm)
Low Diameter: 1" (25.4mm)
Intensity Length: 4.85" (12.3cm)
OR-T-375
Quantity
1
1
1
2
1
1
1
VOLUME RANGE
250µL-10mL
10mL-250mL
10mL-300mL
25mL-500mL
50mL-1L
OR-T-500 OR-T-750
P/N
18-001
OR-TRANS
LT710
XXXX
03-254
18-205
18-206
P/N
OR-T-156
OR-T-375
OR-T-500
OR-T-750
OR-T-1000
OR-T-1000
Power Lim-
it
50%
80%
100%
100%
100%