Installing 3.5-Inch Hdd Modules; Removing A 3.5-Inch Hdd Dummy Module; Installing A 3.5-Inch Hdd/Ssd Module - Fujitsu PRIMERGY TX1330 M4 Operating Manual

6.3.2

Installing 3.5-inch HDD modules

6.3.2.1

Removing a 3.5-inch HDD dummy module

Figure 27: Removing a 3.5-inch dummy module
Ê Press both tabs together (1) and pull the dummy module out of its bay (2).
V
CAUTION!
Save the dummy module for future use.
Always replace dummy modules into unused HDD bays to comply with
applicable EMC regulations and satisfy cooling requirements.
6.3.2.2

Installing a 3.5-inch HDD/SSD module

Figure 28: Opening the 3.5-inch HDD module locking lever
Ê Pinch the green locking clip (1) and open the locking lever (2).
TX1330 M4
Operating Manual
Operation
87