Fujitsu PRIMERGY TX1330 M4 Operating Manual page 94

Troubleshooting and tips
The system will not boot after installing a new HDD
Cause
SAS configuration
incorrect
Screen remains blank
Cause
Monitor is switched off Ê Switch on your monitor.
Screen has gone blank Ê Press any key on the keyboard.
Brightness control is
set to dark
No screen display or display drifts
Cause
Wrong horizontal
frequency or resolution
selected
94
Troubleshooting
Ê Check the settings for the HDDs (SAS Device
Configuration) and the additional settings in the
SAS configuration menu.
Troubleshooting
or
Ê Deactivate screen saver and enter the
appropriate password.
Ê Set the brightness control on the monitor to light.
For more information, see the operating manual
supplied with your monitor.
Troubleshooting
Ê Find out which horizontal frequency your monitor
screen supports. You will find the horizontal
frequency (also known as line frequency or
horizontal deflection frequency) in the
documentation for your monitor.
Ê See the documentation for your operating system
or the software for the screen controller for more
information of how to set the correct horizontal
frequency for your monitor, and follow the
procedure accordingly.
Operating Manual
TX1330 M4