Fujitsu PRIMERGY TX1330 M4 Operating Manual page 98

Troubleshooting and tips
Expansion cards or onboard devices not recognized
When an expansion card is added, other expansion cards or onboard devices
might not be recognized.
Cause
Expansion cards or
onboard devices not
recognized
Expansion cards or onboard devices not recognized
Various HDD/SSD error messages may occur when the system is rebooted.
These error messages are caused by modifications in the selected RAID
configuration.
Cause
RAID controller
configuration incorrect
98
Troubleshooting
Ê Reinstall the drivers for the expansion cards or
onboard devices that are not recognized.
Troubleshooting
Ê Check and correct the settings for the drives using
the RAID controller configuration program.
I
For more information, see the "Integrated
RAID for SAS User's Guide" available online
at http://manuals.ts.fujitsu.com
Servers - Expansion Cards - Storage
Adapters - LSI SAS / SCSI RAID Contollers
or in the "Modular RAID Controller Installation
Guide" available online at
http://manuals.ts.fujitsu.com
Servers - Expansion Cards - Storage
Adapters - LSI SAS / SCSI RAID Contollers.
Operating Manual
under x86
under x86
TX1330 M4