Installation Steps, Overview - Fujitsu PRIMERGY TX1330 M4 Operating Manual

Starting up
5.1

Installation steps, overview

Ê First of all, carefully read the safety instructions in
page 43 and following.
Ê Transport the server to the place where you want to set it up.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered correspond to the details on
the delivery note, see
Ê Ensure that you have all necessary manuals, see
on page 13; print out the PDF files if required.
Ê Components that have been ordered additionally may be delivered loose
with the server. For mounting, see the original component documentation.
Ê Set up the floorstand model, see section
on page 61 or install the rack model in the rack, see section
server in the rack" on page
Ê Connect the devices to the server. To do this, see the sections
connecting/disconnecting cables" on page 68
the server" on page
Ê Connect the server to the mains, see section
on page 70.
Ê If applicable, get access to the drives, see section
(floorstand model)" on page
Ê If applicable, install the HDD/SSD modules, see
modules" on page
Ê If applicable, install an second PSU, see
page 89.
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server, see section
58
"Unpacking the server" on page
64.
69.
82.
85.
"Connectors, controls and indicators" on page
Operating Manual
"Important information" on
60.
"Documentation overview"
"Setting up the floorstand model"
and "Connecting devices to
"Connecting the power cord"
"Access to the drives
"Installing HDD/SSD
"Installing a second PSU" on
"Installing the
"Notes on
28.
TX1330 M4