Serial Commands - CYP CPLUS-V4H2HA Operation Manual

Uhd+ 4×2 hdmi matrix with audio output
Hide thumbs Also See for CPLUS-V4H2HA:
Table of Contents

Advertisement

6.5 Serial Commands

COMMAND
Description and Parameters
HELP
Show the full command list.
HELP N1
Show help details about the specified command.
N1 = {Command name}
GET MODEL NAME
Show the unit's model name.
GET FW VER
Show the unit's current firmware version.
SET SYSTEM REBOOT
Reboot the unit.
SET DESCRIPTION N1
Set the description/name of the unit.
N1 = {Name}
GET DESCRIPTION
Show the unit's current description/name.
SET POWER N1
Turn the unit on or off (stand-by mode).
Available values for N1:
ON
OFF
GET POWER
Show the unit's current power state.
[64 characters max]
[Power on]
[Power off]
6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CPLUS-V4H2HA and is the answer not in the manual?

Table of Contents