Scope Of Delivery; Using Safety Instructions; Structure Of The Safety Instructions; Explaining Signal Words And Safety Alert Symbol - Bosch Rexroth IndraControl SafeLogic SLC-3-GS3S00300 Operating Instructions Manual

Bosch Rexroth AG

Using safety instructions

2.2 Scope of delivery

SafeLogic compact Sercos Gateway SLC-3-GS3S00300
●
3 Using safety instructions

3.1 Structure of the safety instructions

The safety instructions are structured as follows:
CAUTION
Do not open the batteries and do not heat them over 80 °C.
Fig. 3-1: Structure of the safety instructions

3.2 Explaining signal words and safety alert symbol

The safety instructions in this documentation contain specific signal words
(danger, warning, caution, notice) and, if necessary, a safety alert symbol
(according to ANSI Z535.6-2006).
The signal word draws attention to the safety instruction and indicates the risk
potential.
The safety alert symbol (triangular safety reflector with exclamation marks),
preceding the signal words Danger, Warning, Caution indicates hazards for
persons.
DANGER
In case of non-compliance with this safety instruction, death or serious injury
will occur.
WARNING
In case of non-compliance with this safety instruction, death or serious injury
can occur.
4/31
Safety alert symbol
Signal word
Burns and chemical burns due to wrong
battery treatment!
Avoiding danger
Sercos Gateway
Consequences and
source of danger
DOK-CONTRL -SLC*GW*GS3S-IT03-EN-P