About This Documentation; Overview On Target Groups And Product Phases; Purpose - Bosch Rexroth IndraControl SafeLogic SLC-3-GS3S00300 Operating Instructions Manual

Sercos Gateway

1 About this documentation

Editions of this documentation
Edition Release Notes
Date
01 2013-04 First edition
02 2014-02 Supplements
03 2018-09 Standards used are updated
Tab. 1-1: Change Record

1.1 Overview on target groups and product phases

In the following illustration, the framed activities, product phases and target
groups refer to the present documentation.
Example: In the product phase "Mounting (assembly/installation)", the
"mechanic/electrician" can execute the activity "unpack, mount and install" using
this documentation.
Product
Selection
phases
Presales Aftersales
Design engineer
Programmer
Technologist
Target
Process
groups
specialist
Select
Prepare
Activities
Design
Construct
Fig. 1-1: Assigning the present documentation to the target groups, product phases and ac-
tivities of the target group

1.2 Purpose

These operating instructions can only be used together with other SafeLogic
compact operating instructions (see
DOK-CONTRL -SLC*GW*GS3S-IT03-EN-P
Mounting
Engineering
(assembly/installation)
Mechanic/
electrician
Programmer
Commissioning engineer
Unpack Parameterize
Mount Program
Install Configure
Simulate
tab. 1-2 "Required and supplementing
Bosch Rexroth AG
About this documentation
Commissioning Operation
Technologist
Process specialist
Machine
operator
Maintenance
technician
Service
Optimize Operate
Test Maintain
Remove
faults
Create
the NC program
Decommissioning
Mechanic/
electrician
Disposal company
Dismount
Dispose
1/31