5. If needed, adjust the cephalostat head mechanically:
•
For a vertical adjustment, use the cephalostat arm screws (A).
•
For a horizontal adjustment, use the elbow tube clamps screws (B).
4 mm
Adjusting the Nasion Support
To adjust the nasion support, follow these steps:
1. Lower the nasion support to a vertical position.
2. Access the Cephalometric Acquisition Window. In the Program pane, click
3. Launch an x-ray using the x-ray remote control. The nasion support must be
perpendicular to the ear cones.
KODAK 8000C Digital Panoramic and Cephalometric Extraoral Imaging System Installation Guide (SM736)_Ed 02
B
B
Post-Installation Control
A
.
5–15