Electrical Adjustments - Assa Abloy Albany RR1000 Owner's Manual

Electrical Adjustments

Lock-Out Tag-out all electrical power supplied to the door before making any electri-
cal installations or connections. Also Lock-out Tag-out any equipment near the in-
stallation site if that equipment may be inadvertently operated into the area used to
assemble and install the door. Failure to properly de-energize electrical circuits and
disable equipment during installation and/or maintenance could result in death or se-
rious injury.
Consult the control system manual supplied with the door for additional specifications
and detailed instructions for installation and troubleshooting. A full set of electrical
schematics are supplied with each door as well. These will either be located inside the
control system enclosure, or included packaged with the product manuals. Standard
products will utilize one of the two systems shown below.
Albany ACS50 Controller
6410T0030_EN01
A qualified electrician must make all electrical mountings
and connections in accordance with all applicable regulat-
ing authority electrical codes and standards.
2014-08-01
Albany MCC Controller
Page 17