Removing The Bracket From The Standard Surface Base - Technimount System BRACKET PRO 25 Series User Manual

OPERATING THE BRACKET ON THE SAFETY ARM SYSTEM (CONTINUED)
REMOVING THE BRACKET FROM THE
STANDARD SURFACE BASE
1. To remove the bracket from the Safety Arm
System, press the Red Quick Release Mechanism
located on the front of the Standard Surface
Base.
2. While holding the Red Quick Release Mechanism,
slide outwards horizontally to remove from the
base.
Return To Table of Contents
24
Installation Guide
BP25 and 25-HD UG 202111-01 www.technimount.com