Table of Contents
Advertisement
GENERAL OPERATING GUIDELINES FOR THE SAFETY ARM SYSTEM
9 Use the Safety Arm System only as described in
its User Guide.
9 Read all the labels and instructions on the
product before using the Safety Arm System.
9 Always inspect the Clamp Block, Safety Pin, Lock
Pin, and Surface Base before every use.
9 Installing or removing the Safety Arm System
requires a minimum of one (1) trained operator.
9 Do not remove the Safety Arm System or device
from the system while moving with the cot/
stretcher.
9 Stay with the patient and control the Safety Arm
System and device during transport at all times.
CAUTION
9 Never let a patient grab, manipulate or hold the Safety Arm System, the Surface Base or bracket on the cot/
stretcher because it may cause injury to the operator or patient. Secure the Safety Arm System and bracket as
recommended while the patient is on the cot/stretcher.
9 Never use the Safety Arm System as a pole or another location point to pull/push or manipulate the cot/stretcher.
Always manipulate the cot/stretcher with both hands on the handlebar and NOT the Safety Arm System.
Return To Table of Contents
22
Operation Guide
BP25 and 25-HD UG 202111-01
www.technimount.com
Advertisement
Table of Contents
