Table of Contents
Advertisement
INSPECTION PROCESS AND SCHEDULE
MAINTENANCE PROGRAM
The following inspection routine and schedule is intended as a general guide for preventive maintenance of the
Bracket. Factors such as weather, environment, geographical location, and individual usage will necessitate different
maintenance. If you are unsure as to how to perform these maintenance inspections or at what interval to perform
these inspections, please contact your Technical Support Team at techsupport@technimount.com. Check each routine
and replace damaged or worn out parts if necessary.
Follow timetable below for maintenance (either in months (M) or hours (H)), in accordance with your Service's current
maintenance practices and protocols.
ITEM
ROUTINE
9 Inspect Bracket
▪
▪
▪
9 Verify disc
▪
Bracket
▪
▪
9 Do a visual inspection for the Bracket to ensure there
is no damage or chemical attack
Return To Table of Contents
28
Maintenance Guide
Inspect the screws
Ensure it is working properly and there are no
particles, obstacles, or debris
Inspect back screws
Verify that there is no damage or dirt on the discs
and there are no loose screws
The disc can be easily inserted into and removed
from the respective base (Standard Surface Base)
The Standard Disc turns well inside the Standard
Surface Base
BP25 and 25-HD UG 202111-01
6 M
1 M
3 M
OR
OR
OR
12
2 H
6 H
H
X
www.technimount.com
12
M
OR
24
H
Advertisement
Table of Contents
