Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Technimount System Cardiatek
Summary of Contents for Technimount System Cardiatek
- Page 1 CARDIATEK ® USER GUIDE...
-
Page 2: Copyright
Copyright Technimount System, Subsidiary of Technologies CGC Inc. 2019. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of Technimount System or its affiliate companies. Trademark Attributions CARDIATEK®... -
Page 3: Contact Information
Please have the serial number of your Technimount product available (as shown in the figure below) when calling Technimount Customer Service or Technical Support. Include the serial number in all written communications. SERIAL NUMBER LOCATION Manufactured By S/N: TECHNIMOUNT.COM Made in Canada Return To Table of Contents www.technimount.com CARDIATEK UG 202001-R01... -
Page 4: Table Of Contents
Installation of the Bracket onto the Vertical Base of the Wall Mount ...............27 Removing the Cardiatek Bracket from the Wall Mount ..................28 Installation of the Cardiatek Floor Mount onto the floor rails ................29 Installation of the AIC Bracket onto the Floor Mount Surface Base ..............30 Removing the AIC Bracket from the Floor Mount Surface Base ................31... - Page 5 Return of Merchandise ..............................42 Prior to 30 Days ..............................42 Prior to 45 Days ..............................42 Prior to 60 Days ..............................42 Return Merchandise Authorization ........................42 Damaged Merchandise ............................42 SAE CERTIFICATION ............................. 43 FAA CERTIFICATION ............................. 44 CE CERTIFICATION ............................... 45 www.technimount.com CARDIATEK UG 202001-R01...
-
Page 6: Introduction
With the use of the floor mount, this bracket is compatible with the floor platform of air ambulances in Europe. The wall mount and bracket can be used for ground ambulances in Europe and North America. The Cardiatek Bracket is compatible with all of Technimount’s products. -
Page 7: Possible Mounting Options For The Cardiatek Bracket
Introduction POSSIBLE MOUNTING OPTIONS FOR THE CARDIATEK BRACKET Mounting Bracket Wall Mount System (Ground Ambulance in Europe) Technimount Air Ambulance Stretcher Safety Floor Mount Arm System Technimount Universal Standard Base Return To Table of Contents www.technimount.com CARDIATEK UG 202001-R01... -
Page 8: Symbols And Definitions
Introduction SYMBOLS AND DEFINITIONS SYMBOL DESCRIPTION Caution, special attention is required. Consult accompanying documents Safe working load symbol Pinch Point Load balance symbol Return To Table of Contents CARDIATEK UG 202001-R01 www.technimount.com... -
Page 9: Warning / Caution / Note
NOTE Provides special information about the product. Return To Table of Contents www.technimount.com CARDIATEK UG 202001-R01... -
Page 10: Product Illustration
Pole Holder when not in Use Acetal Feet to Protect the Disc, Bracket and the AIC Standard when Placed on the Bottom Disc Floor or Ground Figure 1. CARDIATEK BRACKET FRONT VIEW Return To Table of Contents CARDIATEK UG 202001-R01 www.technimount.com... -
Page 11: Back View
Back is used for Vertical Support on Different Wall or Arm Systems. Red Quick Release Mechanism to Easily Remove Nano Base the Fluid Bag Pole When not in Use Figure 2. CARDIATEK BRACKET BACK VIEW Return To Table of Contents www.technimount.com CARDIATEK UG 202001-R01... -
Page 12: Cardiatek Wall Mount System
Position or Vertical Micro Release QR- Base with Long Gripp Clamp Red Quick Release Button for Easy Access Quick Release Clamps ® QR-Gripp Blue Handle Figure 3. CARDIATEK WALL MOUNT SYSTEM FRONT VIEW Return To Table of Contents CARDIATEK UG 202001-R01 www.technimount.com... -
Page 13: Back View
Red Quick Release Mechanism to Easily Remove Bracket from Vertical Micro Base Quick Release Clamps ® QR-Gripp Reinforced Wall Platform with Lightweight Design Blue Handle Figure 4. CARDIATEK WALL MOUNT SYSTEM BACK VIEW Return To Table of Contents www.technimount.com CARDIATEK UG 202001-R01... -
Page 14: Cardiatek Floor Mount System
Introduction PRODUCT ILLUSTRATION (CONTINUED) CARDIATEK FLOOR MOUNT SYSTEM T-Shape Handle with Stainless Steel Plunger for Installation onto the Floor Rails Technimount Standard Base Red Quick Release Mechanism to Easily Remove Bracket from Technimount Standard Surface Base High-Density Aluminum Plate Return To Table of Contents CARDIATEK UG 202001-R01 www.technimount.com... -
Page 15: Specifications
Introduction SPECIFICATIONS CARDIATEK - BRACKET Product Name Cardiatek™ Bracket Compatibility of Medical Device Automated Impella Controller (AIC) from Abiomed environment of usage EMS (Ground & Flight) – Hospital/Clinic, Military High-Density Aluminum with Gray Anodized Finish – Urethane Feet – Device Section Material... -
Page 16: Cardiatek - Wall Mount
Device Retained on Wall Rails with Quick Release Clamps - Wall Mount retaining System QR-Gripp® - Mechanical Resistance of 1000 lbs/Each Clamp The Cardiatek Bracket is Retained on the Wall System with its Anti-Rotation Medical Device Mount retaining System Back Disc Inserted and Locked Inside Micro Base Tested: Press and Release, Movement with Minor Use –... -
Page 17: Cardiatek - Floor Mount
Part Number 554-20-AB-FL Patent # # 62/909 CAUTION 9 Any changes or modifications to the product will void the warranty. 9 Technimount system reserves the right to change specifications without notice. Return To Table of Contents www.technimount.com CARDIATEK UG 202001-R01... -
Page 18: Notice
The Cardiatek Mounting System is designed to comply with Federal Specifications for the Star-of-Life Ambulance (KKK-A-1822) and SAE J3043. Technimount hereby declares that the Cardiatek Mounting Systems (Bracket, Wall Mount and Floor Mount) are in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC and SAE J3043. A copy of the original declaration of conformity can be obtained by contacting Technimount System’s Regulatory Affairs... -
Page 19: Summary Of Safety Precautions
9 Do not attach restraints to the Cardiatek frame, the surface base, or on any other place of the Cardiatek system. It may result in damage to the System and/or result in injury to the patient or operator. - Page 20 EMS transport. 9 Improper maintenance can cause injury to patient or operator or damage to the product. Maintain the Cardiatek Mounting Systems as described in this user guide. Use only Technimount approved parts and maintenance procedures.
- Page 21 9 Failure to use authorized parts, and lubricants, etc., could cause damage to the equipment and will void the warranty of the product. 9 This user guide should be considered a permanent part of the Cardiatek Bracket, Wall Mount and Floor Mount and should remain with the product even if the equipment is subsequently sold.
-
Page 22: Installation Guide
Installation Guide REMOVING THE PACKAGING FOR INSTALLATION 1. Unpack boxes and check all items for proper operation as the Cardiatek Mounting Systems are delivered fully assembled. 2. Ensure that all shipping and packaging materials have been properly removed from the product(s) prior to installation. - Page 23 Installation Guide INSTALLATION OF THE AIC INTO THE CARDIATEK BRACKET 1. Position the Cardiatek Bracket on a stable surface. 2. Place hand (4 fingers) on the red quick release handle, and thumb on the high-density aluminum part of the handle.
-
Page 24: Installation Of The Fluid Bag Pole
Installation Guide INSTALLATION OF THE AIC INTO THE CARDIATEK BRACKET 7. Take the handle and gently lower the handle onto the AIC to lock the handle securely into position. NOTE Some rubber cushions have been provided to ensure a tighter fit with the bracket in order to limit the vibration of the AIC inside the bracket during transport. -
Page 25: Using The Back Hooks
3. Once the fluid pole is installed securely, the red quick release mechanism on the nano base is released into locked position. 4. The AIC and Cardiatek Bracket is now ready to be installed on another Technimount mounting system, e.g., Cardiatek Wall Mount or Floor Mount, in addition to Technimount’s Safety Arm... -
Page 26: Installation Of The Cardiatek Wall Mount Onto The Rails
2. If the clamp is not releasing when pressing on the red button, turn the handle counter clockwise to unlock the mechanism. 3. Install the Cardiatek Wall Mount on the wall rails of the ambulance. 4. While holding the Quick Release button, push upwards to position each clamp appropriately on the rails. -
Page 27: Installation Of The Bracket Onto The Vertical Base Of The Wall Mount
2. Slide back anti-rotation disc into the vertical base Disc and lock into place. Vertical Base 3. Installation is complete when AIC bracket is securely locked into the vertical base on the Wall Mount. Return To Table of Contents www.technimount.com CARDIATEK UG 202001-R01... -
Page 28: Removing The Cardiatek Bracket From The Wall Mount
Installation Guide REMOVING THE CARDIATEK BRACKET FROM THE WALL MOUNT 1. To release the Cardiatek Bracket from the Wall Mount, push red quick release button located on the vertical base behind the bracket. 2. While button is pressed, lift the Cardiatek Bracket upwards until it slides out of the vertical base of the Wall Mount. -
Page 29: Installation Of The Cardiatek Floor Mount Onto The Floor Rails
Installation Guide INSTALLATION OF THE CARDIATEK FLOOR MOUNT ONTO THE FLOOR RAILS 1. To install the Cardiatek Floor Mount, turn counter clockwise to loosen the red T-Shape Handles. 2. Lift both red T-Shape Handles. 3. Slide and fit into floor rails and release the red T-Shape handles once positioned appropriately inside the rail. -
Page 30: Installation Of The Aic Bracket Onto The Floor Mount Surface Base
Installation Guide INSTALLATION OF THE AIC BRACKET ONTO THE FLOOR MOUNT SURFACE BASE 1. To install the Cardiatek bracket onto the floor mount, slide bottom disc towards the front of the base. 2. Ensure that the bracket is securely locked into the base. -
Page 31: Removing The Aic Bracket From The Floor Mount Surface Base
Installation Guide REMOVING THE AIC BRACKET FROM THE FLOOR MOUNT SURFACE BASE 1. To remove the Cardiatek Bracket from the Floor Mount, push the red Quick Release Button inwards while sliding the Cardiatek Bracket out of the Surface Base of the Floor Mount. -
Page 32: Cardiatek Mounting System Part Numbers
Cardiatek Mounting System Part Numbers KITS AND OTHER OPTIONS DESCRIPTION PART NUMBER Bracket Only 552-10-AB-BR 553-20-AB-WA Wall Mount Only 554-20-AB-FL Floor Mount Only 100-20-UN Unviersal Standard Base WARNING Do not modify any components of these system. Modifying the products can cause unpredictable operation resulting in injury to the patient or operator. -
Page 33: Maintenance Guide
CLEANING THE CARDIATEK SYSTEM CLEANING PROCESS The Cardiatek Bracket, Wall Mount and Floor Mount can be cleaned by using a pressure washer. The mounting bracket and system may show some signs of oxidation or discoloration from continuous washing, however, degradation of the cot/stretcher’s performance or functionality will not be affected due to power washing if cleaning instructions are... -
Page 34: Removal Of Iodine Compounds
9 Some cleaning products are corrosive in nature and may cause damage to the product if used improperly. 9 If the products described are used to clean the equipment, the Cardiatek System and components must be rinsed with clean water and thoroughly dried following cleaning. Failure to properly rinse and dry the system will leave a corrosive residue on the surface of the product, possibly causing premature corrosion of critical components. -
Page 35: Inspection Process And Schedule
The following inspection routine and schedule is intended as a general guide for preventive maintenance of the Cardiatek System. Factors such as weather, environment, geographical location, and individual usage will necessitate different maintenance. If you are unsure as to how to perform these maintenance inspections or at what interval to perform these inspections, please contact your Technical Support Team at techsupport@technimount.com. - Page 36 9 Inspect the locking mechanism of the Standard Base, if pushed the blocker goes into the base 9 Inspect the ball bearings if they roll and are clean of dust and contamination Return To Table of Contents CARDIATEK UG 202001-R01 www.technimount.com...
-
Page 37: Inspection And Maintenance Record
Maintenance Guide INSPECTION AND MAINTENANCE RECORD PREVENTIVE MAINTENANCE DATE TIME PERFORMED Return To Table of Contents www.technimount.com CARDIATEK UG 202001-R01... -
Page 38: Training Record
Maintenance Guide TRAINING RECORD TRAINING DATE TRAINING METHOD USER GUIDE, IN-SERVICE, BASIC TRAINING TRAINEE NAME IN-CLASS, TRAINING UPDATE ETC. Return To Table of Contents CARDIATEK UG 202001-R01 www.technimount.com... -
Page 39: Replacement Parts
Please call Technimount Customer Service or Technical Support : +1.581-998-9820 or at customerservice@technimount.com techsupport@ technimount.com for availability and pricing. DESCRIPTION PART NUMBER Cardiatek Mount Top Red Handle TCM-032-014 Anti-Rotation Back Disc TCM-052-006 Standard Bottom Disc 926-00-SS Left Swivel Hook 963-00-LF... -
Page 40: Warranty
Warranty WARRANTY POLICY Technimount guarantees to the original purchaser that the Cardiatek Bracket will be free from structural defects for three (3) years as long as the original purchaser owns the product. Original purchasers will obtain a one-year (1) limited warranty on all parts related to the Floor Mount and the Wall Mount. -
Page 41: Warranty Options
Technimount’s sole discretion. INTERNATIONAL WARRANTY CLAUSE This warranty reflects Canadian domestic policy. Warranty outside Canada may vary by country. Please contact your local Technimount representative for additional information. Return To Table of Contents www.technimount.com CARDIATEK UG 202001-R01... -
Page 42: Return Policy
Return Policy RETURN OF MERCHANDISE The Cardiatek parts and/or components may be returned up to 60 days of receiving the product(s) if they meet the following guidelines: PRIOR TO 30 DAYS 9 30-day money back guarantee in effect 9 Technimount is responsible for all charges... -
Page 43: Sae Certification
SAE Certification Return To Table of Contents www.technimount.com CARDIATEK UG 202001-R01... -
Page 44: Faa Certification
FAA Certification Return To Table of Contents CARDIATEK UG 202001-R01 www.technimount.com... -
Page 45: Ce Certification
CE Certification Return To Table of Contents www.technimount.com CARDIATEK UG 202001-R01... - Page 46 Technimount System - Brand of Technologies CGC Corporate Headquarters 3770 Jean Marchand Street, Suite 100 Quebec (QC) G2C 1Y6 Canada T + 1 581.998.9820 F + 1 855.339.6351 technimount.com info@technimount.com © Copyright 2020 Technimount System All Rights Reserved Printed in Canada...