Copyright Copyright 2021 Technimount E.M.S. Holding Inc. (Technimount), an affiliated company of Technologies CGC Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of Technimount or its affiliate companies.
Contact Information CORPORATE HEADQUARTERS Technimount E.M.S. Holding Inc. 3770 Jean Marchand Street, Suite 100-C Quebec (QC) G2C 1Y6 Canada info@technimount.com www.technimount.com T + 1 888.639.2758 F + 1 855.339.6351 NOTE: For any issues with your Technimount product, its components, or for any technical questions during the installation or maintenance, please send an email to techsupport@technimount.com.
Table of Contents COPYRIGHT ................................2 CONTACT INFORMATION ............................3 Corporate Headquarters ..............................3 INTRODUCTION ..............................6 Purpose of the Document ............................6 Product Description ..............................6 Intended use of the Product ............................6 Possible Mounting Options for the Bracket Pro Serie® 25 and 25-HD ..............7 Symbols and Definitions ...............................8 Warning / Caution / Note .............................9 Product Illustration ..............................10 BRACKET Pro Serie 25...
Page 5
Table of Contents Return Policy ................................33 Prior to 30 Days ..............................33 Prior 45 Days ................................33 Prior 60 Days ................................33 Return Authorization ..............................33 Damaged Merchandise ..............................34 Claim Process ................................34 Required Information ............................34 Findings and Conclusion .............................34 questions about our policy ............................34 SAE CERTIFICATION .............................
Introduction PURPOSE OF THE DOCUMENT This User Guide is designed to assist you with the installation, operation and maintenance of the Technimount Bracket Pro Serie® 25 and Bracket Pro Serie® 25-HD for the ZOLL X Series monitor/defibrillator from ZOLL Medical Corporation. The information and images shown throughout this user guide are applicable to the Bracket Pro Serie®...
Introduction POSSIBLE MOUNTING OPTIONS FOR THE BRACKET PRO SERIE® 25 AND 25-HD Standard Surface Base Safety Arm System Floor Mount Air Ambulance Return To Table of Contents www.technimount.com BP25 and 25-HD UG 202111-01...
Introduction SYMBOLS AND DEFINITIONS SYMBOL DESCRIPTION Warning and Caution, special attention is required. Consult accompanying documents Safe working load symbol and Load balance symbol Pinch Point Return To Table of Contents BP25 and 25-HD UG 202111-01 www.technimount.com...
Introduction WARNING / CAUTION / NOTE The word warning, caution, or note carry special meaning and should be carefully reviewed. SYMBOL DESCRIPTION Warning Alerts the reader about a situation which, if not avoided, could result in death or serious injury. It may also describe potential serious adverse reactions and safety hazards.
Introduction PRODUCT ILLUSTRATION BRACKET PRO SERIE 25 AND 25-HD Overall View High-density High-density aluminum aluminum lateral block for installation plate with onto the medical device silver or black- anodized finish High-density aluminum side blocks to install onto the medical device Standard Bottom Disc compatible with all of Technimount's mounting solutions CNC machined aluminum feet to protect...
Introduction SPECIFICATIONS Product Name Bracket Pro Serie® 25 Product Description Single disc bracket mounting system to secure the ZOLL® X Series on surfaces and cots/stretchers in emergency vehicles. Compatibility of Medical Device* ZOLL X Series® Monitor/Defibrillator Environment of Usage EMS (Ground & Flight), Hospital/Clinic, Military Product Section Material •...
Page 12
Introduction SPECIFICATIONS Product Name Bracket Pro Serie® 25-HD Product Description Single disc bracket mounting system to secure the ZOLL® X Series on surfaces and cots/stretchers in emergency vehicles. Compatibility of Medical Device* ZOLL X Series® Monitor/Defibrillator Environment of Usage EMS (Ground & Flight), Hospital/Clinic, Military Product Section Material •...
Page 13
End User/Administrator is responsible to validate regulations and standards for safety in their region, in order to comply with applicable safety regulations. Technimount System is not responsible to inform the End User/Administrator of applicable legislation for safety in their area.
9 It is the responsibility of the operator of the Bracket or any of its options, to ensure equipment being used with the Technimount products meets the installation specifications. Injury may result if non-compatible products are used with Technimount System products. 9 Do not attempt to operate, install or remove the equipment while mobile. Ensure that installation and removal of equipment is done while vehicle or aircraft is immobilized.
Page 15
9 Inspect regularly all components on the equipment for any issue and loose screws, bolts and nuts. 9 Never install the mount into or on other similar mounting systems or brackets without written confirmation by Technimount System as these different systems may be from other brands or models and may not be compatible with Technimount Systems.
Installation Guide REMOVING THE PACKAGING FOR INSTALLATION 1. Unpack boxes and check all items. 2. Ensure that all shipping and packaging materials have been properly removed from the product(s) prior to installation. 3. Identify all of the product components and hardware prior to starting the installation. 4.
Installation Guide INSTALLATION OF THE BRACKET ONTO ZOLL X SERIES MONITOR/DEFIBRILLATOR 1. The Bracket Pro Serie 25 and Bracket Pro Serie 25-HD are designed to be installed on the ZOLL X Series Monitor/Defibrillator. 2. Start by removing the 2 blocks located on the bottom of the ZOLL X Series Monitor/Defibrillator.
Page 18
Installation Guide INSTALLATION OF THE BRACKET ONTO THE ZOLL X SERIES MONITOR/ DEFIBRILLATOR (CONTINUED) 4. Locate the Bracket Pro Serie 25 or Bracket Pro Serie 25-HD. 5. Locate both side blocks on the bracket. These need to be removed and installed into the ZOLL X Series Monitor/Defibrillator.
Page 19
Installation Guide INSTALLATION OF THE BRACKET ONTO THE LIFEPAK 15 MONITOR/DEFIBRILLATOR (CONTINUED) 9. The blocks have a left and right side. Left Side Block Right Side Block 10. Locate the screws provided with the bracket. 11. There are two different types of screws. ▪...
Page 20
Installation Guide INSTALLATION OF THE BRACKET ONTO THE LIFEPAK 15 MONITOR/DEFIBRILLATOR (CONTINUED) 13. Ensure the blocks are placed according to the left or right of the ZOLL X Series Monitor/ Defibrillator. 14. Once the blocks are installed, the ZOLL X Series Monitor/Defibrillator can be installed onto the Bracket Pro Serie 25 or Bracket Pro Serie 25-HD.
Page 21
Installation Guide INSTALLATION OF THE BRACKET ONTO THE ZOLL X SERIES MONITOR/ DEFIBRILLATOR (CONTINUED) 17. Install the two (2) Stainless Steel Socket Head Screws into the bracket from under the disc. 18. Tighten both screws. 19. Install the two (2) Flat Head Philips Screws M4 x 0.7 x 25 mm.
Operation Guide GENERAL OPERATING GUIDELINES FOR THE SAFETY ARM SYSTEM 9 Use the Safety Arm System only as described in its User Guide. 9 Read all the labels and instructions on the product before using the Safety Arm System. 9 Always inspect the Clamp Block, Safety Pin, Lock Pin, and Surface Base before every use.
Operation Guide OPERATING THE BRACKET ON THE SAFETY ARM SYSTEM INSTALLING THE BRACKET ON THE STANDARD BASE 1. Only Technimount brackets with a Standard Bottom Disc can be inserted into the Standard Surface Base located on the Safety Arm System. 2.
Installation Guide OPERATING THE BRACKET ON THE SAFETY ARM SYSTEM (CONTINUED) REMOVING THE BRACKET FROM THE STANDARD SURFACE BASE 1. To remove the bracket from the Safety Arm System, press the Red Quick Release Mechanism located on the front of the Standard Surface Base.
Part Numbers KITS AND OTHER OPTIONS DESCRIPTION PART NUMBER Part Number - Bracket Pro Serie 25 100-12-XZ Part Number - Bracket Pro Serie 25-HD 100-12-XZ-HD 100-20-UN Standard Surface Base Several Models Available, Safety Arm System refer to Customer Service WARNING Do not modify any components of these system.
Maintenance Guide CLEANING THE BRACKET SYSTEM CLEANING PROCESS WARNING Follow your EMS service's protocol or medical device manufacturer's User Guide for the recommended cleaning procedure of your medical devices. Cleaning procedure below does NOT provide recommendations for cleaning of the medical device.
Maintenance Guide CLEANING THE BRACKET SYSTEM (CONTINUED) CLEANING SOLUTIONS CONTINUED WARNING 9 Some cleaning products are corrosive in nature and may cause damage to the product if used improperly. 9 If the products described are used to clean the equipment, the Bracket and components must be rinsed with clean water and thoroughly dried following cleaning.
Maintenance Guide INSPECTION PROCESS AND SCHEDULE MAINTENANCE PROGRAM The following inspection routine and schedule is intended as a general guide for preventive maintenance of the Bracket. Factors such as weather, environment, geographical location, and individual usage will necessitate different maintenance. If you are unsure as to how to perform these maintenance inspections or at what interval to perform these inspections, please contact your Technical Support Team at techsupport@technimount.com.
Maintenance Guide INSPECTION AND MAINTENANCE RECORD PREVENTIVE MAINTENANCE DATE TIME PERFORMED Return To Table of Contents www.technimount.com BP25 and 25-HD UG 202111-01...
Maintenance Guide TRAINING RECORD TRAINING DATE TRAINING METHOD USER GUIDE, IN-SERVICE, BASIC TRAINING TRAINEE NAME IN-CLASS, TRAINING UPDATE ETC. Return To Table of Contents BP25 and 25-HD UG 202111-01 www.technimount.com...
Maintenance Guide REPLACEMENT PARTS The parts and accessories listed are all currently available for purchase. Some of the parts identified on the assembly drawing parts in this user guide may not be individually available for purchase. Please call Technimount Customer Service : +1.888-639-2758 or at customerservice@technimount.com for availability and pricing.
Warranty WARRANTY POLICY This statement constitutes TECHNIMOUNT’s entire warranty policy with regards to the TECHNIMOUNT Products. TECHNIMOUNT MAKES NO OTHER WARRANTY OR REPRESENTATION NEITHER EXPRESSED NOR IMPLIED, EXCEPT AS SET FORTH HEREIN. THERE IS NO WARRANTY OF MERCHANTABILITY AND THERE ARE NO WARRANTIES OF FITNESS FOR ANY PARTICULAR PURPOSE.
Warranty RETURN POLICY Mounting systems and bracket systems for portable medical devices may be returned up to 60 days of receipt if: ▪ The product is not what was origionally ordered ▪ The product does not meet specifications with TECHNIMOUNT's technical sheets according to the customer ▪...
Warranty DAMAGED MERCHANDISE ICC Regulations require that claims for damaged merchandise must be made with the carrier within fifteen (15) days of receiving merchandise. DO NOT ACCEPT DAMAGED SHIPMENTS UNLESS SUCH DAMAGE IS NOTED ON THE DELIVERY RECEIPT AT THE TIME OF RECEIPT. Upon prompt notification, TECHNIMOUNT will file a freight claim with the appropriate carrier for damages incurred.