Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Technimount System BRACKET PRO 101 Series
Summary of Contents for Technimount System BRACKET PRO 101 Series
- Page 1 BRACKET PRO SERIE ® USER GUIDE...
-
Page 2: Copyright
Copyright Copyright 2021 Technimount E.M.S. Holding Inc (Technimount), an affiliated company of Technologies CGC Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of Technimount or its affiliate companies. -
Page 3: Contact Information
Contact Information OFFICE ADDRESS Technimount E.M.S. Holding Inc. 3770 Jean Marchand Street, Suite 100-C Quebec (QC) G2C 1Y6 Canada info@technimount.com www.technimount.com T + 1 888.639.2758 F + 1 855.339.6351 NOTE: For any issues with your Technimount product, its components, or for any technical questions during the installation or maintenance processes, please send an email to techsupport@technimount.com Please have the serial number of your Technimount product available (as shown in the figure below) when calling... -
Page 4: Table Of Contents
Table of Contents COPYRIGHT ................................2 CONTACT INFORMATION ............................3 INTRODUCTION ..............................6 Product Description ..............................6 Intended use of the Product ............................6 Possible Mounting Options for the Bracket Pro Serie 101 ..................7 Symbols and Definitions ...............................8 Warning / Caution / Note .............................9 Product Illustration ..............................10 BRACKET Pro Serie 101 ............................10 Front View ..................................10 Back View ..................................11... - Page 5 Table of Contents limited responsibility and warranty ..........................36 international Warranty Clause ..........................36 This warranty reflects Canadian domestic policy. Warranty outside Canada may vary by country. Please contact TECHNIMOUNT Customer Service for more information..................36 Return Policy ................................37 Prior to 30 Days ..............................37 Prior to 45 Days ..............................37 Prior to 60 Days ..............................37 Return Authorization ..............................37...
-
Page 6: Introduction
Introduction This user guide is designed to assist you with the installation, operation and maintenance of the Technimount Bracket Pro Serie 101 for the TV-100 ventilator from Bio-Med Devices. PRODUCT DESCRIPTION The Bracket Pro Serie 101 Mounting System is the only universal solution to mount the TV-100 ventilator from Bio- Med Devices in different applications such as, on surface, floor, cot/stretcher and wall systems. -
Page 7: Possible Mounting Options For The Bracket Pro Serie 101
Introduction POSSIBLE MOUNTING OPTIONS FOR THE BRACKET PRO SERIE 101 Safety MD Transporter Wall Mount System (EU) Floor Mount Safety Arm System Air Ambulance Standard Surface Base Return To Table of Contents www.technimount.com BP101 UG 202111-01... -
Page 8: Symbols And Definitions
Introduction SYMBOLS AND DEFINITIONS SYMBOL DESCRIPTION Warning and Caution, special attention is required. Consult accompanying documents Safe working load symbol and Load balance symbol Pinch Point Return To Table of Contents BP101 UG 202111-01 www.technimount.com... -
Page 9: Warning / Caution / Note
Introduction WARNING / CAUTION / NOTE The word warning, caution, or note carry special meaning and should be carefully reviewed. SYMBOL DESCRIPTION Warning Alerts the reader about a situation which, if not avoided, could result in death or serious injury. It may also describe potential serious adverse reactions and safety hazards. -
Page 10: Product Illustration
Introduction PRODUCT ILLUSTRATION BRACKET PRO SERIE 101 Front View New rubber pads have been added to protect the medical Main Assembly is device from scratches attached to the medical device according to existing installation points for mounting with 4 screws Standard Bottom Disc compatible with all of Technimount’s... -
Page 11: Back View
Introduction PRODUCT ILLUSTRATION (CONTINUED) BRACKET PRO SERIE 101 (CONTINUED) Back View Back Plate is Bracket is made installed into the with High-Density main assembly Aluminum with Silver- with 4 Screws Anodized Finish Anti-Rotation Micro Disc is used for vertical support on different Wall or Arm Systems Return To Table of Contents... -
Page 12: Specifications
Introduction SPECIFICATIONS Product Name Bracket Pro Serie® 101 Dual disc bracket mounting system to secure the TV-100 Ventilator on Product Description surfaces, cots/stretchers, floors and walls in emergency vehicles Compatibility of Medical Device* TV-100 Ventilator from Bio-Med Devices Environment of Usage EMS (Ground &... - Page 13 Notice/Certification The Bracket Pro Serie 101 is tested in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC, SAE J3043 and FAA, 14 CFR § 23 (applicable sections). For more information, please contact Technimount Customer Service (customerservice@technimount.com) Technimount E.M.S.
-
Page 14: Summary Of Safety Precautions
Summary of Safety Precautions WARNING/CAUTION/NOTE Carefully read and strictly follow all Warnings and Cautions listed in this user guide. Servicing and maintenance should only be done by qualified personnel. WARNING 9 Always hold the Bracket with both hands when you manipulate it. 9 Operate the bracket only as described in this user guide. - Page 15 Summary of Safety Precautions WARNING/CAUTION/NOTE (CONTINUED) CAUTION 9 Only certified technical personnel familiar with the Bracket installation and use should manipulate it. Always refer to Technimount's user guides for all instructions for installing and using any Technimount Mounting System. 9 Inspect regularly all components on the equipment for any issue and loose screws, bolts and nuts. 9 Never install the mount into or on other similar mounting systems or brackets without written confirmation by Technimount as these different systems may be from other brands or models and may not be compatible with Technimount.
-
Page 16: Installation Guide
Installation Guide REMOVING THE PACKAGING FOR INSTALLATION 1. Unpack boxes and check all items. 2. Ensure that all shipping and packaging materials have been properly removed from the product(s) prior to installation. 3. Identify all of the product components and hardware prior to starting the installation. 4. -
Page 17: Installation Of The Bracket Onto The Tv-100 Ventilator
Installation Guide INSTALLATION OF THE BRACKET ONTO THE TV-100 VENTILATOR 1. The Bracket Pro Serie 101 is designed to be installed on the TV-100 ventilator. 2. Using a Phillips Screwdriver, remove the metal plate located on the back of the ventilator by removing all 4 screws. - Page 18 Installation Guide INSTALLATION OF THE BRACKET ONTO THE TV-100 VENTILATOR (CONTINUED) 6. Place the TV-100 inside the main assembly. 7. Once the TV-100 is inside the main assembly, install all four Stainless steel Phillips button head screws 8-32 x 1"into the medical device. 8.
- Page 19 Installation Guide INSTALLATION OF THE BRACKET ONTO THE TV-100 VENTILATOR (CONTINUED) 10. Place back plate onto the main assembly. 11. Back plate is placed properly into the main assembly. 12. Install all four Stainless steel button head philips screw 10-32 x 5-8"into the main assembly. Return To Table of Contents www.technimount.com BP101 UG 202111-01...
- Page 20 Installation Guide INSTALLATION OF THE BRACKET ONTO THE TV-100 VENTILATOR (CONTINUED) 13. Tighten all four (4) screws. 14. Once all screws have been installed, replace the power supply back onto the TV-100. 15. Slide into the openings from the side to insert back onto the TV-100.
- Page 21 Installation Guide INSTALLATION OF THE BRACKET ONTO THE TV-100 VENTILATOR (CONTINUED) 16. The power supply is locked onto the TV-100. 17. The TV-100 mounting bracket has 2 discs providing multiple configuration options: ▪ Anti-Rotation Micro Disc vertical mounting systems ▪ Standard Bottom Disc for Standard Suface Base systems 18.
-
Page 22: Operation Guide
Operation Guide GENERAL OPERATING GUIDELINES FOR THE SAFETY MD TRANSPORTER 9 Use the Safety MD Transporter only as described in the user guide. 9 Read all the labels and instructions on the product before using the Safety MD Transporter. 9 Always inspect the Micro Base and the Safety MD Transporter for any issue or damage before every use. -
Page 23: Operating The Bracket On The Safety Md Transporter
Operation Guide OPERATING THE BRACKET ON THE SAFETY MD TRANSPORTER INSTALLING THE BRACKET ONTO THE SAFETY MD TRANSPORTER 1. Only Technimount brackets with an Anti-Rotation Micro Disc on the back can be inserted into the Micro Base located on the Safety MD Transporter. 2. -
Page 24: Rotating The Bracket On The Safety Md Transporter
Operation Guide OPERATING THE BRACKET ON THE SAFETY MD TRANSPORTER (CONTINUED) INSTALLING THE BRACKET ONTO THE SAFETY MD TRANSPORTER (CONTINUED) 4. A Bracket Pro Serie 101 installed on the Safety MD Transporter. ROTATING THE BRACKET ON THE SAFETY MD TRANSPORTER 1. -
Page 25: Removing The Bracket With The Medical Device From The Safety Md Transporter
Operation Guide OPERATING THE BRACKET ON THE SAFETY MD TRANSPORTER (CONTINUED) REMOVING THE BRACKET WITH THE MEDICAL DEVICE FROM THE SAFETY MD TRANSPORTER 1. To remove the bracket from the Safety MD Transporter, press the red quick release button located on the back Micro Base. 2. -
Page 26: General Operating Guidelines For The Safety Arm System
Operation Guide GENERAL OPERATING GUIDELINES FOR THE SAFETY ARM SYSTEM 9 Use the Safety Arm System only as described in its user guide. 9 Read all the labels and instructions on the product before using the Safety Arm System. 9 Always inspect the Clamp Block, Safety Pin, Lock Pin, and Standard Surface Base before every use. -
Page 27: Operating The Bracket On The Safety Arm System
Operation Guide OPERATING THE BRACKET ON THE SAFETY ARM SYSTEM INSTALLING THE BRACKET ON THE STANDARD SURFACE BASE 1. Only Technimount brackets with a Standard Bottom Disc can be inserted onto the Standard Surface Base located on the Safety Arm System. 2. -
Page 28: Removing The Bracket From The Standard Surface Base
Installation Guide OPERATING THE BRACKET ON THE SAFETY ARM SYSTEM (CONTINUED) REMOVING THE BRACKET FROM THE STANDARD SURFACE BASE 1. To remove the bracket from the Standard Surface Base, press the Red Quick Release Mechanism located on the front of the Standard Surface Base. -
Page 29: Part Numbers
Part Numbers KITS AND OTHER OPTIONS DESCRIPTION PART NUMBER Bracket Only 1210-10-TV 554-20-AB-FL Floor Mount Only 100-20-UN Standard Surface Base Several Models Available, Safety Arm System refer to Customer Service Different Models Available, Safety MD Transporter refer to Customer Service WARNING Do not modify any components of this system. -
Page 30: Maintenance Guide
Maintenance Guide CLEANING THE BRACKET SYSTEM CLEANING PROCESS The Bracket can be cleaned by using a pressure washer. The bracket may show some signs of oxidation or discoloration from continuous washing, however, degradation of the cot/stretcher’s performance or functionality will not be affected due to power washing if cleaning instructions are properly followed. -
Page 31: Removal Of Iodine Compounds
Maintenance Guide CLEANING THE BRACKET SYSTEM (CONTINUED) CLEANING SOLUTIONS CONTINUED WARNING 9 Some cleaning products are corrosive in nature and may cause damage to the product if used improperly. 9 If the products described are used to clean the equipment, the Bracket and components must be rinsed with clean water and thoroughly dried following cleaning. -
Page 32: Inspection Process And Schedule
Maintenance Guide INSPECTION PROCESS AND SCHEDULE MAINTENANCE PROGRAM The following inspection routine and schedule is intended as a general guide for preventive maintenance of the Bracket. Factors such as weather, environment, geographical location, and individual usage will necessitate different maintenance. If you are unsure as to how to perform these maintenance inspections or at what interval to perform these inspections, please contact your Technical Support Team at techsupport@technimount.com. -
Page 33: Inspection And Maintenance Record
Maintenance Guide INSPECTION AND MAINTENANCE RECORD PREVENTIVE MAINTENANCE DATE TIME PERFORMED Return To Table of Contents www.technimount.com BP101 UG 202111-01... -
Page 34: Training Record
Maintenance Guide TRAINING RECORD TRAINING DATE TRAINING METHOD USER GUIDE, IN-SERVICE, BASIC TRAINING TRAINEE NAME IN-CLASS, TRAINING UPDATE ETC. Return To Table of Contents BP101 UG 202111-01 www.technimount.com... -
Page 35: Replacement Parts
Maintenance Guide REPLACEMENT PARTS The parts and accessories listed are all currently available for purchase. Some of the parts identified on the assembly drawing parts in this user guide may not be individually available for purchase. Please call Technimount Customer Service : +1.888-639-2758 or at customerservice@technimount.com for availability and pricing. -
Page 36: Warranty
Warranty WARRANTY POLICY This statement constitutes TECHNIMOUNT’s entire warranty policy with regards to the TECHNIMOUNT Products. TECHNIMOUNT MAKES NO OTHER WARRANTY OR REPRESENTATION NEITHER EXPRESSED NOR IMPLIED, EXCEPT AS SET FORTH HEREIN. THERE IS NO WARRANTY OF MERCHANTABILITY AND THERE ARE NO WARRANTIES OF FITNESS FOR ANY PARTICULAR PURPOSE. -
Page 37: Return Policy
Warranty RETURN POLICY Mounting systems and bracket systems for portable medical devices may be returned up to 60 days of receipt if: ▪ The product is not what was origionally ordered ▪ The product does not meet specifications with TECHNIMOUNT's technical sheets according to the customer ▪... -
Page 38: Damaged Merchandise
Warranty DAMAGED MERCHANDISE ICC Regulations require that claims for damaged merchandise must be made with the carrier within fifteen (15) days of receiving merchandise. DO NOT ACCEPT DAMAGED SHIPMENTS UNLESS SUCH DAMAGE IS NOTED ON THE DELIVERY RECEIPT AT THE TIME OF RECEIPT. Upon prompt notification, TECHNIMOUNT will file a freight claim with the appropriate carrier for damages incurred. -
Page 39: Sae Certification
SAE Certification Return To Table of Contents www.technimount.com BP101 UG 202111-01... - Page 40 Safety and flexibility where it matters most Technimount E.M.S. Holding Inc 3770 Jean Marchand Street, Suite 100-C Quebec (QC) G2C 1Y6 Canada T + 1 888.639.2758 F + 1 855.339.6351 technimount.com info@technimount.com © 2021 Technimount E.M.S. Holding Inc. - All Rights Reserved Printed in Canada...