Table of Contents
Advertisement
OPERATING THE BRACKET ON THE SAFETY ARM SYSTEM (CONTINUED)
REMOVING THE BRACKET FROM THE
STANDARD SURFACE BASE
1. To remove the bracket from the Safety Arm
System, press the Red Quick Release Mechanism
located on the front of the Standard Surface
Base.
2. While holding the Red Quick Release Mechanism,
slide outwards horizontally to remove from the
base.
3. Hold the Tempus Pro monitor from the middle of
the unit to gently remove from the base.
www.technimount.com
Installation Guide
BP76 UG 202110-01
Return To Table of Contents
29
Advertisement
Table of Contents
