Commissioning - Omnik Omniksol-1k-TL2 User Manual

Omnik inverter is not an aligned measuring
instrument for current, voltage or power
consumption.
A slight deviation of a few percent points is intrinsic
to the system; the results from the inverter cannot
be used for grid balance calculations. An aligned
meter will be required to make calculations for the
utility company.

7.2 Commissioning

The power supply of display module is AC grid, so the screen
will not be available until AC is connected.
A minimum available voltage of 150Vdc and a DC power of >10Wdc is required before
the inverter starts feeding power to the grid.
AC side: Turn on the AC circuit break and the display module will works.
DC side: Turn on the DC switch.
When the inverter is started for the first time, a menu is displayed to choose language
and the country where the inverter installed, English, Dutch and Deutsch are available
for display.
32
NOTICE
NOTICE
NOTICE
You need to confirm that you choose the right country safety to
ensure that compliance with local standards.